1942 - 1984 arcade board no sound repair
Capcom 1942(1984)
Diagnosis
Board is a bit grubby. Turns on. Plays fine. No sound, amp buzzes. The client states it has no sound. Obviously.
It’s a double Z80A board, one for main CPU one for sound CPU.
The repair
Probed with oscilloscope. 2x PSG has no activities. Sound CPU Z80A is quiet too.
Checked the sound CPU ROM, the dumped verified OK.
Piggyback a known good Z80A doesn’t work either. Z80A is not held by any /RESET signal. So the sound CPU might be working just not receiving any signals.
From the schematics, the sound CPU is accepting a SOUND INIT signal from the main CPU. Tested the signal goes out from main CPU without issue.
Trace along the line, A 74LS367 at F10 is relaying SOUND INIT signal to sound CPU.
Tested the pin is floaty. Bull’s eye.
Piggybacked a new 74LS367 it start to make sound. Proceed to extraction and replacement.
After that buffer IC is replaced, the sound came back nice and clean.
Fully repaired.





